Glazes and Tools



Please read all glaze instructions below.


Clayscapes cone 5/6 glazes are made in Central NY and now available in Southeast Virginia and beyond!

*Shipping - Glazes can be picked-up locally (Norfolk, VA) or delivered. Shipping calculated at checkout.

- All glazes are sold as dry mixes - Mixing depends on how you intend to use them: Brushing or Dipping/Pouring. 1 lb. jars come with brushing medium already added and can be mixed right in the jar. For larger amounts, just add brushing medium (if applicable) and water. For Dipping and Pouring - add a starter amount of water and mix right in the bag to start and then mix and sieve to appropriate hydrometer reading. Additional mixing instructions linked below. They can also be sprayed with some water adjustment and proper safety equipment.

Glaze test-tiles with each product are shown to give you an idea of the color you are ordering. Color varies with application and clay-body. Additional pictures are provided for reference in layering glazes etc. for convenience, but should be tested using your processes prior to application on final work.

SAFETY WARNINGS - Tableware producers must test all finished ware to establish dinnerware status due to possible variations in firing temperature, contamination, and layering. All powdered dry glazes contain Crystalline Silica which is known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to Always use a NIOSH approved respirator, do not use around food or beverages, and provide adequate ventilation. In order to ensure successful results, test before using. Glazes are non-returnable. SDS Linked below. 

- How much to buy? This depends on the amount needed when mixed wet. Approximately 1 pound of dry glaze makes 1 pint of wet glaze (see guidance documentation - some glazes require more water than others therefore not all will equal 1 pint when properly mixed.) 5 pounds dry will fit in a gallon bucket when mixed with some room for dipping/pouring. 10 pounds dry will fit in a 3 gallon bucket when mixed with some room for dipping/pouring.

Amy's quantity recommendations: I start with 20 pounds dry to a 5 gallon bucket - depending on the glaze, this will either leave a lot or a little room in the bucket for dipping/pouring. Then, I keep 10 pound quantities of my regular-use glazes on-hand dry to replenish my 5 gallon dipping bucket as needed by mixing it in a separate bucket and sieving it into my studio-use bucket.

Read all mixing and safety information prior to use. 


Safety Data Sheet LINKED HERE. (Updated 2022)

Link to Jiffy Mixer - The recommended tool for mixing 1lb Dry Brushing Mixes in Bottles.

This  Glaze Mixing Video is great! As is this longer video about how to mix Clayscapes Glazes! 

How to re-hydrate thickened or dried out wet-brushable jars and samples: - cover with water in container and allow to sit overnight. Stir and add enough water so that they are a thin to medium thickness milkshake consistency.

Mixing and Safety Tips:

- Hands/Skin: I try to minimize how long my hands are in any glaze. Unless I know the exact ingredients and their safety - I prefer caution. Even the most inert ingredients in glazes have skin-drying properties. If you'd like to wear gloves these reusable ones are a favorite.

- Lungs/Masks: I wear a P100 rated mask whenever mixing any dry ingredients in my clay studio. This is the base-mask I use. These are the Pink particulate filters in the 3M brand for reference that fit onto a face piece like this. This is a great starter kit for mixing dry glazes.

***If I'm working with any lusters or other items that off-gas any volatile organic chemicals (e.g. lusters, opals, etc. in ceramics), I wear a P100 cartridge that is also fitted with Organic Vapor/Acid Gas part to the cartridge

- Sieving/Filtering - This process makes sure you get all the good fine particles in your slurry and none of the larger particles or contaminants that are natural from the mined sources of constituents in glazes. I sieve all my glazes. Sieves are rated in mesh sizes that are described in different ways. This chart helps understand the different mesh size descriptions. I really like this mesh that fits in a 5-gallon bucket and has a really large mesh area for the glaze to filter through. I like to have some of these spatulas on hand in the studio to help push the glaze through the sieve and just general use needs.

- I always use a hydrometer (measures specific gravity) to mix my glazes to a consistent fluidity. Most of the problems that new mixed glazes have in firings have to do with getting the right thickness. With Clayscapes glazes there are recommended tested hydrometer readings that are a great starting point. Once you dial-in the hydrometer reading for your specific water source that works great in your firings, you'll have that as a reference for mixing new batches. 

Other info...

- Test glazes on your clay and process before placing into production.

- Glazes are non-returnable.

- Satin Black, Copper Patina, and Garden Green are not food-use appropriate.

- This Facebook Group is great to join to search and read about others experiences with these glazes as well as share your experiences!

- How to get started? Combos and must haves...
-- Looking for glossy translucency over relief? Try the Celadon's: Shadow Blue, Amber Celadon, Tim's Dark Green, Smokey Purple, Fog Grey, Clear. (No mason-stains to create colors).
-- Looking for glossy bright colors? Try 'The Brooklyn Line' of colors.
-- Combo must-have ideas: Shadow Blue with Amber Celadon, Aqua with Tim's Dark Green
-- My favorites: Cream, Crystal Clear (Zinc Free), Clinton Pottery Red, Coastal Blue, Spruce Blue.
-- Want something more advanced: Try the Galaxy Bowl Combination: 2 dips Starry Night all the way to the bottom of the pot - wipe drips from rim. Then drip/pour Arctic Blue, Wheat, and Turquoise Rain on top.
-- Check out the combo pictures with each glaze listing for more combo ideas!

Showing all 1 Products
  • Grid List
All Hands Pottery - 2" Extruder Dies
Description These extruder dies from Angela Lindauer at All Hands Pottery fit perfectly into the...